Choose a smooth surface that is clean and dry.Materials such as bare concrete,
unpainted plaster,rendering and roughcast are not
stuitable.
Position the motifs of all without applying pressure to get an idea
of the effect they create.
Reposition them if necessary
Once you are happy with the position,press them down with a cloth to make them stick,rubbing STRONGLY on the motif.
Mirror sticker
Choose a smooth surface that is clean and dry
Position the sticker without applying pressure.
Once you are satisfied with the position,press it down with a cloth to make it sick,rubbing strongly on the surface.Then peel off the protective film on the mirror.
Tile sticker
Wash the tiles with a household window cleaner.
Peel sticker form paper backing starting at the cut on top. Protect image from lint.
Position the motifs.Press them down with a cloth to make them stick,rubbing STRONGLY on the motif.
Window film
Wash the inside of the window with a household window cleaner.The film will adhere to smooth glass or plastic
Using a sponge or spray bottle,liberally wet window with water containing a few drops of liquid detergent.
Unroll,lay flat,peel film from paper backing starting at the cut on top.Protect image from
Place the side that was facing backing paper (shiny side) onto the wet glass and
Wet front of image.Staring from the center,use a squeegee or other smooth edge (credit card) to press out air bubbles.Repeat until smooth & dry.
Energy Saving Film
测量玻璃尺寸并裁剪膜
Carefully measure your window before cutting.Cut the film at least an inch larger than the glass on all four sides. The excess will be trimmed once film is applied.
揭去保护膜
Unroll,lay flat,peel film from paper backing starting at the cut on top.
将窗贴贴到玻璃表面上
Place the side that was facing backing paper (shiny side) onto the wet glass and position.
用刮板刮去多余的水和残
留的气泡，使窗贴牢固贴
于玻璃上 Wet front of image.Starting form the center of image, use a squeegee to press out air bubbles, Repeat until smooth & dry.
Application
