WallPaper Flash Deals
Self-adhesive furniture sticker in wooden look by fancy-fix Scope of supply:
1 x coil furniture sticker (44.5 x 300 cm)
1 x Instruction manual Installation:
Step 1: Measure the area to be covered and draw this on the rear of the adhesive foil. Cut the foil at the marking. For exact finishing off the edges allow 3-4 mm extra and cut this off immediately after applying.
Step 2: Remove the first 2 to 3cm of backing paper and fold it down.
Step 3: Stick down the adhesive foil on one side.
Step 4: Smooth it using a clean cloth.In the meantime you can continue to remove some more of the backing paper.
Step 5: Finally smooth it cut from the center to the edges to remove air bobbles. Necessary supporting items (not included in scope of supply): - Scissor and utility knife - Rule - Smooth cloth Notes: - Make sure that the surface is clean and dry from the dirt. - Heavily textured surfaces may affect the adhesive glue effect. - Using a smooth surface is therefore strongly recommended! - Be careful when working with the utility knife in order to avoid injuries. Tips: - The use of regular adhesive tape can help to remove the sticker on the back. - If some air bubbles still remain, pop them with a pin and rub again.
Redecorate you home now with the attractive furniture sticker in red wooden look from fancy-fix.